Garments

EN 342 Protective clothing against cold
EN 343 Protective clothing against rain
EN 1149 Protective clothing - Electrostatic properties
EN ISO 11393 Protective clothing for users of hand-held chainsaws
EN ISO 13998 Protective clothing against cuts and stabs by hand knives
EN 1073-2 Protection against particulate radioactive contamination
EN 14126 Protective clothing against infective agents
EN 14605 Protective clothing against liquid chemicals. Liquid tight – TYPE 3 and spray-tight TYPE 4
EN 13982 Chemical protective clothing against airborne solid particles and aerosols, TYPE 5
EN 13034 Chemical protective clothing with limited protective performance against liquids, TYPE 6
EN 14058 Protective clothing against cool environment
EN ISO 11612 Protective clothing against heat and flame
EN ISO 14116 Protection aganst flame and heat - materials with limited flame spread
EN ISO 11611 Protective clothing for use in welding and allied processes
EN ISO 27065 Protective clothing worn by operators applying pesticides
IEC 61482-1-2:2009 Protective clothing against the thermal hazards of an electric arc. Parameters: Class 1 < 4 kA; Class 2 < 7 kA
IEC 61482-2:2018 Protective clothing against the thermal hazards of an electric arc. Parameters: Class 1 / APC 1 < 4 kA; Class 2 / APC 2 < 7 kA
EN 61340 ESD Protection of electronic devices from electrostatic phenomena
EN ISO 20471 High-visibility clothing for professional use
RIS 3279 TOM High visibility clothing standard issued UK Rail Safety and Standards Board Limited
EN 469 Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
EN ISO 13688 Protective clothing - general requirements
EN 13356 Visibility accessories for non-professional use
EN 1150 Protective clothing - visibility clothing for non-professional use

Gloves

EN ISO 21420This standard defines the general requirements for glove design and construction, innocuousness, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and provided information.
EN 407Protective gloves against thermal risks
  1. resistance to flammability (1-4)
  2. resistance to contact heat (1-4)
  3. resistance to convective heat (1-4)
  4. resistance to radiating heat (1-4)
  5. resistance to small melting metal spray (1-4)
  6. resistance to a large melting metal spray (1-4)
EN 388Protective gloves against mechanical risks
  1. Abrasion resistance (1–4)
  2. Cut resistance (1–5)
  3. Tear resistance (1–4)
  4. Puncture resistance (1–4)
  5. Cut resistance the ISO 13997 (A-F)
  6. Impact protection (P)
ISO 374-1:2016 / Type AGloves for protection protection against high chemicals risks (U, V, W, X, Y, Z represent the code letters for chemicals that conform to EN ISO 374-1:2016+A1:2018)
ISO 374-1:2016 / Type BGloves for protection protection against medium chemicals risks (X, Y, Z represent the code letters for chemicals that conform to EN ISO 374-1:2016+A1:2018)
ISO 374-1:2016 / Type CGloves for protection protection against low chemicals risks
EN ISO 374-5:2016 (VIRUS)Protection against dangerous microorganism
EN 421Protective gloves against ionizing radiation and radioactive contamination
EN 381-7Protective clothing for users of hand-held chainsaws - part 7: requirements for chainsaw protective gloves
EN 12477Protective gloves for welders
DIN EN 1082Protection against cuts and stabs by hand knives
EN 511Protective gloves against cold
  1. Convective cold resistant
  2. Contact cold resistant
  3. Water penetration
EN ISO 10819 Mechanical vibration and shock – hand arm vibration
EN 60903Work under voltage
EN 61340 ESDProtection of electronic devices from electrostatic phenomena
CE FOODSAFEEuropean legislation with respect to Food Contact Materials (Directive EC 1935/2004, EC 10/2011)


The code letters for chemicals that conform to EN ISO 374-1:2016

A Methanol / B Acetone / C acetonitrile / D Dichloromethane / E Carbon disulphide / F Toluene / G Diethylamine / H Tetrahydrofurane / I Ethyl acetate / J n-Heptane / K Sodium hydroxide 40 % / L Sulphuric acid 96 % / M – Nitric acid 65% / N – Acetic acid 99% / O – Ammonium hydroxide 25% / P - Hydrogen peroxide 30% / S – Hydrofluoric acid 40% / T – Formaldehyde 37%

Shoes

BASIC CATEGORIES OF SAFETY AND OCCUPATIONAL SHOES

EN ISO 20345:2011

SAFETY SHOES (with toe cap)

SB

basic requirements

S1

SB + closed seat region, antistatic, energy absorption in heel area

S2

S1 + conjuction and absorption of water

S3

S2 + penetration resistance, cleated outsole

S4

SB + antistatic, energy absorption in heel area

S5

S4 + penetration resistance, cleated outsole

EN ISO 20347:2012

OCCUPATIONAL SHOES (without toe cap)

OB

basic requirements

O1

OB + closed seat region, antistatic, energy absorption in heel area

O2

O1 + conjuction and absorption of water

O3

O2 + penetration resistance, cleated outsole

O4

OB + closed seat region, antistatic, energy absorption in heel area

O5

O4 + penetration resistance, cleated outsole

EN ISO 17249

Safety footwear with resistance to chain saw cutting

Eye protection

EN 166

Guaranteed minimum resistance of the protective eyewear against everyday risks including dropping the protective eyewear onto the ground, ageing by light exposure, exposure to heat or corrosion etc.

EN 169

Personal eye-protection - filters for welding and related techniques - transmittance requirements and recommended use

EN 170

Transmittance requirements

EN 172

Personal eye protection - sunglare filters for industrial use

EN 175

Equipment for eye and face protection during welding and allied processes

EN 1731

Mesh eye and face protectors

EN 379

Automatic welding filters

Hearing protection

EN 352:2002

European standard for protectors against noise is made in several parts for the safety and testings on the different types of individual noise protectors.

EN 458:2004

Hearing protectors – recommendations for selection, use, care and Maintenance.

SNR: xx dB SNR (single number rating) is only a general means of comparing different ear protectors. Generally the higher the SNR number the better the performance of the ear defender across a range of noise frequencies. For example a SNR of 27 decibel may not give a 27 decibel attenuation at all High, Medium or Low frequencies.

SNR: xx d8

SRN (single number rating) is only a general means of comparing different ear protectors. Generaly the higher the SRN number the better the performance of the ear defender across a range of noise frequencies.

Hard hat

Is a type of helmet predominantly used in workplace environments such as industrialor construction sites to protect the head from injury due to falling objects, impact with other objects, debris, rain, and electric shock. Hard hats could be combinated with face protection and hearing protection.

EN 397

The standard industrial safety helmets

EN 14052

The standard for high performance industrial safety helmets

EN 12492

The standard for mountaineers

EN 50365

The standard for electrical insulation

Bump cap

Is a lightweight hard hat using a simplified suspension or padding and a chin strap. Bump caps are used where there is a possibility of scraping or bumping one‘s head on equipment or structure projections, but are not sufficient to absorb large impacts, such as that from a tool dropped from several stories.

EN 812

The standard for industrial bump caps

Passive respiratory protection

Respirators – disposable, reusable / Half-Facepiece masks / Full-Facepiece masks

EN 136

Full face masks

EN 143

Particle filters

EN 140

Half masks and quarter masks

EN 148-1

Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection

EN 149

Respiratory protective devices - filtering half masks to protect against particles - requirements, testing, marking

EN 14387

Gas filter(s) and combined filter(s)

EN 405

Respiratory protective devices - valved filtering half masks to protect against gases or gases and particles - requirements, testing, marking

EN 1827

Respiratory protective devices - half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - requirements, testing, marking

Active respiratory protection

Powered Air Systems

EN 12021

Respiratory equipment - compressed gases for breathing apparatus

EN 12941

Respiratory protective devices - powered filtering devices incorporating a helmet or a hood - requirements, testing, marking

EN 12942

Respiratory protective devices - power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking

EN 14594

Respiratory protective devices - continuous flow compressed air line breathing apparatus - requirements, testing, marking

EN 60079-11

Equipment protection by intrinsic safety "i"

EN 60079-31

Equipment dust ignition protection by enclosure "t"

 

EN 60529

Degrees of protection provided by enclosures (IP Code)

Safety harnesses

EN 341 Personal fall protection equipment - descender devices for rescue
EN 353-1, 2 PPE against falls from a height - guided type fall arresters
EN 354 Personal fall protection equipment. Lanyards.
EN 355 PPE against falls from a height - energy absorbers
EN 358 PPE for work positioning and prevention of falls from a height - belts for work positioning and restraint and work positioning lanyards
EN 360 PPE against falls from a height - retractable type fall arresters
EN 361 PPE against falls from a height - full body harnesses
EN 362 PPE against falls from a height - connectors
EN 363 Personal fall protection equipment - personal fall protection systems
EN 397 Industrial safety helmets
EN 795 Personal fall protection equipment - anchor devices
EN 813 Personal fall protection equipment - sit harnesses
EN 892 Mountaineering equipment - dynamic mountaineering ropes
EN 1496 Personal fall protection equipment - rescue lifting devices
EN 1497 Personal fall protection equipment - rescue harnesses
EN 1498 Personal fall protection equipment - rescue loops
EN 1868 PPE against falls from a height - list of equivalent terms
EN 1891 PPE for the prevention of falls from a height - low stretch kernmantel ropes
EN 12841 Personal fall protection equipment - rope adjustment devices
EN 12275 Mountaineering equipment - Connectors
Nothing to compare